花岗岩残积粘性土加、卸荷抗剪强度分析     

于月娥  程小勇 《中国地质灾害与防治学报》2011,22(1):115-121

以广州地区花岗岩残积粘性土为研究对象,通过击样法制备特定含水量试样,在不同压力下进行固结加、卸荷试验,对比分析试验数据,初步研究加、卸荷状态下花岗岩残积粘性土的抗剪强度变化,探寻先期固结压力、含水量与抗剪强度间规律。重塑残积土抗剪强度随含水量增加而减小;在先期固结压力相同的条件下,卸荷相对加荷试验条件下的土体强度显著减小,且减少值随残积土含水量的增加而逐渐减小,故在基坑开挖等卸荷工程项目中,应充分考虑卸荷对土体抗剪强度的影响,在卸荷工程中采用土体卸荷抗剪强度指标更符合工程实际。  相似文献   

瓦屋山水电站厂房区红层岩体古滑坡稳定性研究     

王子忠  许模  杨绍平 《工程地质学报》2011,19(2):213-218

红层岩体以其岩体结构的软硬相间及软弱夹层发育而在边坡稳定方面表现为"易滑地层".瓦屋山水电站厂房区边坡为顺向坡,砂岩类岩石与黏土岩类岩石呈缓倾、互层状(倾角10°～20°)产出.构造与表生改造作用下,在这两类软硬相间的岩石界面上常形成分布较为连续的软弱夹层,这类岩体较易沿软弱夹层产生顺层滑动.地质历史时期,瓦屋山厂房区...  相似文献   

撒哈拉地台霍嘎地区某金矿地质特征     

章贤能  李德成  王拥军  曹诚  李友恒 《安徽地质》2011,21(2):143-149

太古宙绿岩带是世界主要金矿赋存区,在古老的非洲地台分布很多绿岩带,其上叠加剪切带即伴随有含金建造的出现。本文根据安徽地矿"走出去"实施的某绿岩区金矿勘查资料、西霍嘎地块地质背景、区域上金矿赋存规律及邻区正在开采的金矿考察,初步分析了该区金矿地质特征、控矿要素、矿床成因及找矿标志,供后续勘查投资和周边中方相同地质背景矿权区找金参考。  相似文献   

海南石碌铁矿床构造变形特征及其与铁多金属成矿富集的关系   总被引：1，自引：0，他引：1  

许德如  吴俊  肖勇  陈福雄  王力  刘朝露  王智琳 《地质通报》2011,30(4):553-564

海南石碌铁矿曾被誉为“亚洲最大的富铁矿”,其形成、定位与褶皱变形及伴随的剪切、塑性流动等构造密切相关。石碌矿区构造变形大致分为早期(D1)复式向斜的形成时期、晚期(D2)褶皱叠加和剪切变形时期。后者又进一步分为韧-脆性变形(D2a),脆-韧性变形、层间滑脱断层形成(D2b)和脆性变形、矿体破坏(D2c)3个阶段。石碌铁矿床受NW—SE向复式向斜及其与NE—NNE向褶皱叠加所形成的横跨或斜跨褶皱的严格控制;褶皱过程所伴随的剪切变形和高温塑性流动是富铁矿形成的重要机制。复式向斜轴部,尤其是2期向斜褶皱轴的叠加部位往往可发现厚大的富铁矿体。  相似文献   

Application of a BEM time stepping algorithm in understanding complex unsteady propulsion hydrodynamic phenomena     

Gerasimos K. Politis 《Ocean Engineering》2011,38(4):699-711

We solve the problem of unsteady potential flow around a system of arbitrarily moving rigid or flexible, lifting or non-lifting bodies, in an infinite fluid free of distributed vorticity. For the solution we use a time stepping algorithm and a potential based formulation of the corresponding free BVP. Nonlinear free shear layer dynamics are included in our modeling. This is a major innovation in treating complex unsteady propulsion problems since no simplifying assumptions (like that of a helicoidal wake) are used regarding the wake model. Bilinear quadrilateral elements are used to describe body and shear layer geometry at each time t. Three types of Kutta conditions can be alternatively applied for the determination of the shed vorticity from lifting bodies. The theoretical and numerical aspects of the method are presented followed by a number of applications, elucidating the qualitative and quantitative physical characteristics of a number of complex unsteady propulsion problems.  相似文献   

Postbuckling of shear deformable stiffened anisotropic laminated cylindrical shell under axial compression     

Zhi-Min Li  De-Qing Yang 《Ocean Engineering》2011,38(10):1246-1255

A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive.  相似文献   

Measurement and modeling of bed shear stress under solitary waves   总被引：1，自引：0，他引：1  

Jaya Kumar Seelam  Paul A. Guard  Tom E. Baldock 《Coastal Engineering》2011

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.  相似文献   

静力触探技术在东海陆架工程勘察中的应用研究     

陈培雄  刘奎  吕小飞  李冬  王振红 《海洋学研究》2011,29(4):71-76

通过对东海大陆架海底浅表层土样的静力触探参数进行统计分析,得到该区域细砂、粘土、淤泥质土和淤泥的静力触探统计值,建立了研究海区基于静力触探参数的土类判别图,可用于快速判定土的类别.根据静力触探参数,并应用经验公式估算了海底粘性土的抗剪强度和灵敏度,对估算公式经验系数选择进行了深入研究,提出在研究海区应用经验公式进行粘性...  相似文献   

俯冲带地震诱发机制:研究进展综述   总被引：4，自引：0，他引：4  

邵同宾  嵇少丞 《地质论评》2015,61(2):245-268

俯冲带作为地球循环体系的关键部位,具有构造活跃、地震多发以及地质条件复杂等特征。基于震源位置,俯冲带地震既可划分为板间和板内地震,也可分为浅源、中源和深源地震。俯冲带内的浅源地震包括板间地震和浅源板内地震,而中源和深源地震皆属于板内地震。在地球浅部,温度与压力低,浅源地震是由岩石发生脆性破裂或沿着先存断层发生不稳定摩擦滑移造成的。随着深度增加,温度和压力的增加使得流行于浅部的脆性和摩擦行为在无水条件下被强烈抑制,岩石从而表现为可抑制地震的韧性行为,使得中-深源地震的诱发机制有别于常规的脆性行为。随着研究的逐渐深入,人们了解到中源地震的诱发机制主要是脱水或与流体相关的致脆以及塑性剪切失稳,而深源地震的成因主要是相变致裂。然而,中-深源地震很可能是两种或两种以上机制共同作用的结果。例如,在中源深度既可能是流体相关的致脆导致脱水源区的脆性围岩产生地震,亦可能是脱水的蛇纹岩本身可能在流体孔隙压的作用下作粘滑滑移,而前者比后者更为重要。孕震带宽度大于"反裂隙模型"预测的亚稳态橄榄石冷核宽度的深源地震可能是由第一阶段的相变致裂和第二阶段的塑性剪切失稳诱发,而孕震带的实际宽度与预测宽度相当的深源地震则可能仅由相变致裂引起。只要过渡带内名义无水矿物中的结构水能释放出来,脱水致脆同样可能触发一些深源地震;而塑性剪切失稳不仅能在中-深源地震触发后的扩展阶段起着主导作用,而且还能单独触发一些中-深源地震,因此能够解释大多数反复发生的中-深源地震活动。  相似文献   

长江与嘉陵江交汇区水流结构的数值模拟          下载免费PDF全文

王协康  周苏芬  叶龙  王海周 《水科学进展》2015,26(3):372-377

针对天然河流交汇区域复杂的地形条件及水流运动特性,采用水气两相流三维数值模型,对长江与嘉陵江交汇区水流运动进行深入研究,分析了交汇区域分离区、剪切层、流速场及螺旋度的变化特性。研究结果表明:长江与嘉陵江交汇的水流分离区形状受地形影响明显,随着水位的增加向右岸移动,剪切层整体呈一个扭曲的曲面;干支流原有的环流在交汇之后重新汇合,左岸未出现明显的环流,右岸逆时针的环流有减弱趋势,交汇区域纵向流速呈现高速与低速带分布特征。此外,长江和嘉陵江在交汇口下游螺旋度呈现左侧为负、右侧为正的对称分布,水流结构表现出逐渐形成双螺旋流的趋势,其中左侧的螺旋流逆时针运动,右侧的螺旋流顺时针运动。  相似文献